|
課程名稱 |
塑性力學
Theory of Plasticity |
|
開課學期 |
100-2 |
|
授課對象 |
工學院 結構工程組 |
|
授課教師 |
劉進賢 |
|
課號 |
CIE7015 |
|
課程識別碼 |
521 M1160 |
|
班次 |
|
|
學分 |
3 |
|
全/半年 |
半年 |
|
必/選修 |
選修 |
|
上課時間 |
星期五2,3,4(9:10~12:10) |
|
上課地點 |
土研407 |
|
備註 |
總人數上限：34人 |
|
|
|
|
課程簡介影片 |
|
|
核心能力關聯 |
核心能力與課程規劃關聯圖 |
|
課程大綱
|
|
為確保您我的權利,請尊重智慧財產權及不得非法影印
|
|
課程概述 |
(1). Evidences of plastic behavior:塑性行為證據
Experiments.塑性力學的材料與結構實驗證據
Truss of three bars.三桿桁架之塑性行為
State, state space, and path.狀態、狀態空間、路徑
(2). Framework of mechanics of materials, theory of structures, and theory of elasticity:材料力學、結構學、彈性力學的理論與解題架構
Kinematics, constitution, and equilibrium.機動、組成、平衡
Generalized stress and generalized strain.廣義應力、廣義應變
Goal of the present course.本課程之目標
(3). Yield condition and yield surface降伏條件、降伏面
(4). Plastic flow rules and switch of plasticity塑流規則與塑性機制的開關
(5). Models of Perfect elastoplasticity完全彈塑性組成律
(6). Hardening and softening硬化軟化
(7). Slip line theory滑移線理論
(8). Limit analysis極限分析
(9). Dynamic plasticity: wave and vibration塑性動力學─波動及振動
(10). Boundary value problems彈塑性邊界值問題
(11). Finite element method in elastoplastic theory彈塑性邊界值問題之有限元素法
(12). Thermodynamic aspects of plasticity塑性的熱力學面向 |
|
課程目標 |
瞭解彈塑性材料之組成律理論、力學行為、實驗方法與分析方法，以及眾多之應用領域。 |
|
課程要求 |
|
|
預期每週課後學習時數 |
|
|
Office Hours |
|
|
指定閱讀 |
|
|
參考書目 |
1. Jirasek and Bazant, Inelastic Analysis of Structures, Wiley, 2002.
2. Chen and Han, Plasticity for Structural Engineers, Springer-Verlag, 1988. (高立圖書)
3. Wu, Continuum Mechanics and Plasticity, Chapman & Hall/CRC, 2005. (本校圖書館有電子書)
4. Nemat-Nasser, Plasticity, Cambridge University Press, 2004.
5. Lubliner, Plasticity Theory, Macmillan, 1990.
6. Brokowski, Analysis of Skeletal Structural Systems in the Elastic and Elastic-Plastic Range, Elsevier, 1988.
7. Martin, Plasticity, MIT Press, Cambridge, Mass., 1975. (台科大圖書館)
8. Prager, An Introduction to Plasticity, Addison-Wesley, Reading, Mass., 1959.
9. Horne, Plastic Theory of Structures, 2nd ed., Pergamon Press, Oxford, 1979.
10. Mendelson, Plasticity: Theory and Application, Macmillan, 1968. (良宜出版社)
11. Hill, The Mathematical Theory of Plasticity, Oxford University Press, Oxford, 1950.
12. Kachanov, Foundations of the Theory of Plasticity, North-Holland, 1971.
13. Chakrabarty, Theory of Plasticity, 2nd ed., McGraw-Hill, 1998. (滄海書局)
14. Johnson and Mellor, Engineering Plasticity, Van Nostrand Reinhold, London, 1973.
15. Cristescu, Dynamic Plasticity, North-Holland, 1967, 2nd ed., World Scientific, 2007.
16. Wong, Plastic analysis and design of steel structures, Elsevier, Butterworth-Heinemann, Burlington, Mass., 2009. (本校圖書館有電子書)
|
|
評量方式
(僅供參考) |
|
|